6 Tips to Setting Up Recording Studio Reference Monitors
Whether you work in a radio production studio, post production sound studio, TV edit suite, a bedroom project studio or world class music recording facility, the placement of your reference monitors matter.
When making critical decisions about EQ and stereo placement…if your studio reference monitors are not placed correctly your audio mix will not translate outside of your studio environment.
I’ve put together these 6 tips to getting your reference monitors properly setup and placed so you can get the best out of your studio recordings.
1. Don’t Use Consumer Speakers
It must be said straight away that using so called “consumer” speakers as a way to mix your audio is a mistake. Most consumer speakers are made to enhance the sound coming out of the speakers, to make it sound more pleasing for the casual listener. In your recording environment you want the flattest, most neutral sound possible to help you make the right decisions for your mix.
Studio reference monitors come in many sizes and price ranges. Here is a Top 10 list of the best recording studio reference monitors from Attack Magazine. If you’ve been mixing with home speakers and want your mixes to sound their best, it’s time to invest in proper recording studio reference monitors.
I use Behringer TRUTH B2030A reference monitors in my studio…no, they didn’t make the list, but I like them.
2. Stay Away From the Walls
I remember many years ago when shopping for a pair of new speakers for my home, the salesman placed the speakers right up against the wall, going as far as to cram a cassette tape box between the speaker and the wall to “bring out the bottom end” as he put it. When you place a speaker against a wall it gives it an accentuated bass response…something that may sound cool in your living room, but simply won’t do in a recording studio environment.
Freestanding placement of your reference monitors is ideal. See my example below.
Most studio reference monitors come with recommendations to compensate for your room if you need it. My Behringers let you adjust low frequency, high frequency and give an option for room adjustment (see photo below). Read the manual that came with your reference monitors.
3. Keep Them Symmetrical
When you place your studio reference monitors keep them positioned symmetrically. The distance from the speaker to the left and right wall should be identical. Likewise the 2 monitors should be the same distance from the back wall.
4. The Ideal Angle
Putting your reference monitors too close or too far apart from each other will give you a false sense of the stereo image you’re trying to create. Ideally, place your speakers about 3 feet apart and each speaker 3 feet from your sitting position. The ideal angle for your reference monitors is 60º…or 30º to the left and 30º to the right of your listening position.
5. Watch Out for Reflections
To get the most out of your reference monitors you’ll want to have as clean a monitoring environment as possible. This means minimizing the amount of reflective surfaces in your room. Keep in mind that reflections don’t just come from the walls but also from unavoidable surfaces like your mixer or table top, maybe even a TV screen. Minimize the amount of reflective surfaces directly between you and your monitors as much as possible by laying down a thin rubber mat on your table tops, perhaps lift up the rear of your mixer to change the angle of any reflection bouncing up at you from it. You’ll also need to think about your ceiling…reflections will be bouncing down towards you unless you place acoustic treatment up there also.
Don’t forget reflective surfaces behind and/or to the side of your listening position. They will add longer (delayed) reflections and influence your mixing choices.
Don’t try to create a completely “dead” room like the anechoic chamber at Orfield Laboratories in South Minneapolis, meaning no reflections anywhere, because that is a completely unrealistic listening environment.
6. Control Your Volume
It goes without saying that working in your studio at high volume levels is not good for your hearing over the long term.
In the short term, mixing at loud levels will give you bad results when your mix is listened to at average, lower levels.
It doesn’t matter how much you paid for your reference monitors, it’s a scientific fact that the louder you listen to music the more the lows and highs drop off. Trying to EQ the low end of your project while blasting your speakers will leave the bottom sounding flat when listened to at normal volume, the same goes for the high end. The phenomena is best explained through the Fletcher-Munson curves.
If you want to get the most out of your reference monitors use them at a reasonable volume in the range of 80-85 dBspl.
Conclusion
Setting up your studio reference monitors properly will enhance your recording studio environment and ultimately the audio output of your studio.
I hope these tips have helped you. Do you have any tips to add? Enter it in the comments field below.